Pulsar 4.0 Pro

 

 

F5J Electric Sailplane 4 m span.

Code 2.10

Download

The three piece wing which is extremely light but very strong, is built with a Kevlar/carbon woven cloth D-box leading edge, with carbon capped ribs and a carbon trailing edge.
This design is not afraid of heat and cold, is not afraid of moisture and rain. Wing and control surfaces are not subject to warping, as is usually the case with full balsa model counterparts.
The control surfaces are pre-hinged with integral shrouds fitted to the flaps and ailerons making less drag.

Central panel of the Pro model is made with a cross "V" 2 degrees, which improves the performance models, especially in small thermals.

The fuselage has easily removable canopy for R/C equipment service.

The fuselage can be equipped with a ballast chamber at the request of the customer.

 

Download

  

Specifications:

 

Wing span                     3980 mm

Length                          1740 mm

Wing Area                     85,7 sq. dm

Airfoil                           AG 25 mod.

Weight (less R/C gear)   1050 g

 

Control: Ailerons, Rudder, Elevator, Flaps, Motor.
 

 

+ - More information. Click to collapse

Equipment Installation Diagram.

Download

 

Recommended Equipment:

 

Motor                  Kontronik KIRA 480-50+5,2:1

Controller             Phoenix  ICE Lite 75SB

Battery pack         3 LiPo 2200 Ah

Propeller              folding 13” x 8”

Spinner                38/40/42 mm

Servo                  2 x 9 mm elevator and rudder,

                         4 x 13 mm flaps and ailerons.

Recommended Control Travel:

 

Elevator     +15/-14 mm

Rudder       +/-36 mm

Flap           Full down

Ailerons      +15 mm/-14 mm Take off and landing

                 +12 mm/-6 mm Glide

Use the template to set "0" flaps and ailerons.
Download template.

 Assembling instruction: see here

 

 Video:



 

Tape down all removable parts before flying!

GOOD LUCK!


You can write us: vitaliy300679@gmail.com