Pulsar 3.6 Pro RES

 

F3J Sailplane Rudder/ Elevator/ Spoiler  3,6 m span

Code 1.8S

 

 

 Download

Pulsar 3.6 Pro RES has been designed for popular RES competition.
The three piece wing which is extremely light but very strong, is built with a kevlar/carbon woven cloth D-box leading edge, with carbon capped ribs and a carbon trailing edge.
This design is not afraid of heat and cold, is not afraid of moisture and rain. Wing and control surfaces are not subject to warping, as is usually the case with full balsa model counterparts.
The spoilers and rudder are pre-hinged.

Central panel of the Pro model is made with a cross "V" 2 degrees, which improves the performance models, especially in small thermals.
The special shape of the fuselage is designed for precise landing and meets the requirements of the F3J FAI rules.
The fuselage is equipped with a ballast chamber for easy and rapid exchange of ballast in windy weather.

 

Download

 

Specifications:

 

Wing span                     3580 mm

Length                          1815 mm

Wing Area                     80,5 sq. dm

Airfoil                           AG 25 mod.

Weight (less R/C gear)    980 g

 

Control: Rudder, Elevator. Spoilers.

Equipment Installation Diagram.

 

Download

Recommended Equipment:

 

Receiver battery    4 x 4/5 SC NiMh

Servo                   2 x 13 mm elevator and rudder,

                          2 x 9 mm for spoilers.

                        (2 x 13 mm flap for REF version) 

Recommended Control Travel:

 

Elevator       + / - 15 mm

Rudder         Full right/ left

Spoilers        Full up

Available Pulsar 3.6 Pro Rudder/Elevator/Flap version REF.

Code 1.8F

Download

 

Download

Available Pulsar 3.6 Pro RES(F) with V-tail.

Download

 

 

 

Tape down all removable parts before flying! 

GOOD LUCK!


You can write us: vitaliy300679@gmail.com